Difference between revisions of "Heating of a liquid"

From apimba
Jump to navigation Jump to search
Line 1: Line 1:
 
A liquid with dissolved solids was placed on a stove at a certain setting and the temperature of the liquid was measured over time. The data was graphed (temperature vs time) which gave a curved line that maxed out. A best fit of the data yielded an equation for the line, and the first derivative of that equation gave a rate of change of the temperature per unit time:
 
A liquid with dissolved solids was placed on a stove at a certain setting and the temperature of the liquid was measured over time. The data was graphed (temperature vs time) which gave a curved line that maxed out. A best fit of the data yielded an equation for the line, and the first derivative of that equation gave a rate of change of the temperature per unit time:
  
f(t)=30e<sup>−0.3t</sup>
+
f'(t)=30e<sup>−0.3t</sup>
  
 
This equation describes how the liquid responds to the heat setting of the stove. In this case, f(t) is the temperature change per minute and t is the time in minutes.
 
This equation describes how the liquid responds to the heat setting of the stove. In this case, f(t) is the temperature change per minute and t is the time in minutes.

Revision as of 16:37, 1 April 2021

A liquid with dissolved solids was placed on a stove at a certain setting and the temperature of the liquid was measured over time. The data was graphed (temperature vs time) which gave a curved line that maxed out. A best fit of the data yielded an equation for the line, and the first derivative of that equation gave a rate of change of the temperature per unit time:

f'(t)=30e−0.3t

This equation describes how the liquid responds to the heat setting of the stove. In this case, f(t) is the temperature change per minute and t is the time in minutes.

For this experiment, the amount that the temperature increased from 0 to 5 minutes can be calculated using integrals, which can give total amounts.

f(t)dt = 30e−0.3tdt